| QM INDUSTRIES QVPN28V500SB Mounted Units & Inserts | DE_:64; B_:17; GRS rpm:8500; Macha rpm:12000; dd min:50; db max:42; SBRG:2; C_conv:50500; TSR rpm:10000; DI_:44; |
| QM INDUSTRIES QVVPG16V070SET Mounted Units & Inserts | C:28 mm; Basic static load rating C0:150 kN; D:85 mm; Db min.:80 mm; r1,2 min.:2.5 mm; Limiting speed:8000 r/min; Da max.:76.5 mm; d1 ≈:61.2 mm; Ca min.:5 mm; d:40 mm; |
| QM INDUSTRIES QVPN28V500SO Mounted Units & Inserts | Attainable speed for grease lubrication:40000 r/min; Basic static load rating C0:5 kN; d2:32.1 mm; Static axial stiffness, preload class C:119 N/µm; Preload class C GC:240 N; Calculation factor f:1.05; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor fHC:1.02; Basic dynamic load rating C:9.23 kN; Mass bearing:0.07 kg; |
| QM INDUSTRIES QVPN14V060SEN Mounted Units & Inserts | Basic dynamic load rating C:3910 kN; r1,2 min.:5 mm; Basic static load rating C0:9500 kN; Calculation factor Y2:2.1; Fatigue load limit Pu:750 kN; T:288.9 mm; Mass bearing:195 kg; Comparative axial load rating CFa:238 kN; Calculation factor e:0.48; Design variant/feature:TQO/GWI; |
| QM INDUSTRIES QVVPN19V080SET Mounted Units & Inserts | d:360 mm; r0:2.5 mm; Mass bearing:70.5 kg; r1,2 min.:5 mm; B:82 mm; h:12.5 mm; Calculation factor A:10.4; ra max.:4 mm; Calculation factor Y1:0.66; Fatigue load limit Pu:38 kN; |
| QM INDUSTRIES QVVPN19V080SEN Mounted Units & Inserts | Initial grease fill:68.04 g; H:161.925 mm; Pa:6.94 kN; RG:1/4 NPT; P90°:59.6 kN; H2:30.163 mm; PG:1/8 NPT; R2:21.431 mm; Stabilizing ring:SR-15-0; Max. speed for Taconite seal:1250 r/min; |
| QM INDUSTRIES QMMH15J300SM Mounted Units & Inserts | b:11.1 mm; Fatigue load limit Pu:88 kN; r1,2 min.:3 mm; Calculation factor Y1:2; ra max.:2.5 mm; d1:90 mm; Reference speed:2400 r/min; da max.:130 mm; Basic static load rating C0:950 kN; D1 ≈:184 mm; |
| QM INDUSTRIES QAFY08A108SEB Mounted Units & Inserts | d1:88.9 mm; B:18 mm; B1:58 mm; Mass adapter sleeve assembly:1.45 kg; Lock nut:KM 20; G:M 100x2; B4:20 mm; d3:130 mm; d:100 mm; Locking device:MB 20; |
| QM INDUSTRIES QVVPN19V303SEB Mounted Units & Inserts | Ring Size:Standard; Retainer Type:Std Retainer; Bearing Insert Material:Steel; Ship Weight:13.9 LB; Housing Material:Cast Iron; Base to Center Height:Not Applicable; End Cap Groove:Yes; Anti-Rotation Pin:Yes; Housing Coating:Powder Coat; Grease Type:Unirex N2; |
| QM INDUSTRIES QVPA28V125SM Mounted Units & Inserts | Initial grease fill:232.47 g; PG:1/4 NPT; Adapter sleeve assembly:SNW 22x3.13/16; H1:125.425 mm; h:45.244 mm; L:419.1 mm; Housing:SSAFS 522; Ca:62.89 mm; ba:50.006 mm; P180°:72.5 kN; |
| QM INDUSTRIES QVVPN19V304SEM Mounted Units & Inserts | P180°:36.9 kN; Lock washer:W 16; Labyrinth ring (db shaft position):LOR 84; Labyrinth ring (dc shaft position):LOR 60; J1:53.975 mm; Appropriate attachment bolt size G:0.625 in; Da:170 mm; P90°:55.6 kN; P120°:33.8 kN; Bearing:1316; |
| QM INDUSTRIES QMMH18J090SET Mounted Units & Inserts | Material constant KM:330; r1 min.:0.6 mm; Basic static load rating C0:200 kN; d:45 mm; G:M 45x3; d2 max.:104 mm; l1 min.:95 mm; Mass rod end:2.55 kg; dk:60 mm; α:7 °; |