| RIT 32207 Roller Bearings | Macha rpm:0; LangID:1; C0:26500; ALP1:13; D_a max:1054; X0:1; Y2:2.7; ra:6; bomp:241/670CAMK30E4; hidTable:ecat_NSSPHR; |
| RIT S6203 Ball Bearings | RG:3/8 NPT; Taconite seal:TER 115; H:244.475 mm; A2:231.775 mm; Bearing:23026 CCK/W33; L:419.1 mm; R1:73.025 mm; ba:51.594 mm; h:40.922 mm; PG:1/4 NPT; |
| RIT 62052RS X 1 Ball Bearings | Calculation factor f2B:1.02; B:13 mm; Static axial stiffness, preload class A:88 N/µm; d1:37.7 mm; Calculation factor (single, tandem) Y2:0.87; Calculation factor f1:0.99; da min.:34.6 mm; d:30 mm; ra max.:1 mm; db max.:37.2 mm; |
| RIT 6010-2RS FENCR/ALVANIA NO.2 Ball Bearings | Y2:3.7; GRS rpm:8500; C0:6.3; cyl dia:9.525; LangID:1; Y0:2.5; SRI:5; X2:0.65; SREN:0; d:30; |
| RIT 24032 MBC4W513 Roller Bearings | S:0.794 mm; J max.:222.25 mm; Attachment bolt diameter G:15.875 mm; H2:41.275 mm; B:85.725 mm; L:266.7 mm; H:144.463 mm; J min.:209.55 mm; d2:101.6 mm; A1:91.281 mm; |
| RIT 6206-C3 Bearings | F:45; KBRG:8513; hidYobi:FCJS-72; yobi:FCJS-72; hidTable:ecat_NSCF; T:38000; B_:29; E:1; X:14; G:M24×1.5; |
| RIT 62032RS X 3/4 Bearings | C:108; Fw:78.5; yobi:NJ213ET; DE_:108.5; C_conv:108000; TSR rpm:6000; DI_:78.5; D_:120; C0:119; hidTable:ecat_NSCLDR; |
| RIT SR8 ZZ Bearings | r1,2 min.:5 mm; Mass shaft washer:21.3 kg; B:36.5 mm; d:180 mm; d1:360 mm; |
| RIT F4ZZ EZO Roller Bearings | Basic static load rating C0:17.6 kN; D:72 mm; r1,2 min.:1.1 mm; Calculation factor f0:13; Calculation factor kr:0.025; B:17 mm; d1 ≈:46.1 mm; Limiting speed:13000 r/min; D1 ≈:61.7 mm; Mass bearing:0.26 kg; |
| RIT 13-79-DR-TF Ball Bearings | ALPHA_:0; d:180; hidTable:ecat_NSCLDR; LangID:1; Ew:282; r1:4; r:4; da:196; D_b min:288; SBRG:2; |
| RIT 6210-Z-C3 Bearings | H:474.663 mm; Pa:95.2 kN; Labyrinth ring:2 x LOR 168; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.5 in; P60°:423 kN; J1:133.35 mm; Cap bolt recommended tightening torque:400 N·m; N1:41.275 mm; R1:130.175 mm; |
| RIT F698-ZZ Bearings | Static axial stiffness, preload class A:59 N/µm; d1:77.26 mm; Calculation factor f2B:1.03; da max.:76.5 mm; Attainable speed for grease lubrication:22000 r/min; d2:74.9 mm; rb max.:0.6 mm; Fatigue load limit Pu:0.655 kN; d:65 mm; D2:91.1 mm; |