| S LIMITED CRL 11 Bearings | ball material:Alloy Steel; overall height:39.5 mm; manufacturer catalog:www.aurorabearing.co; thread direction:Right Hand; ball width:9 mm; rod end type:Female Threaded; length to ball center:30 mm; thread type:-6H; misalignment angle:13 º; shank thread length:14 mm; |
| S LIMITED R20 2RS PRX Bearings | drawn cup type:Open Ends with Full; series:B; maximum rpm:3800 RPM; dynamic load capacity:3950 lbf; B:1/2 in; precision rating:Not Rated; d:1-1/8 in; lubrication hole type:No Hole; D:1-3/8 in; compatible inner ring:IR-1416; |
| S LIMITED UCPA208-25MM A Bearings | d:100mm; SKU:22320ejw33c2-timken; D:215mm; Limiting Speed Rating (r/min):2400; Static Load Rating (kN):910; Availability:In Stock; Seals or Shields:Open Type; Dynamic Load Rating (kN):804; Reference Speed Rating (r/min):2800; B:73mm; |
| S LIMITED UCFX12-38MM Bearings | operating temperature range:Maximum of +120; closure type:Open; internal clearance:C0; bore type:Straight; D:62 mm; maximum rpm:14000 RPM; finish/coating:Uncoated; outer ring width:16 mm; standards met:DIN 630; precision rating:P0, ABEC 1 (ISO; |
| S LIMITED SAPK206-30MMG Bearings | seal type:Contact/Lip; housing material:Cast Iron; manufacturer catalog number:125362; lubrication type:Lubrication Fitting; expansion type:Non-Expansion Bearin; B:4-3/4 in; finish/coating:Uncoated; d:1.7500 in; series:209; slot spacing:4.0000 in; |
| S LIMITED UCP203-11MM 47 Bearings | thread direction:Right Hand; head diameter:3/4 in; lubrication type:Maintenance Free rod end type:Male Threaded; head width:0.281 in; ball width:0.312 in; d:0.2500 in; grade:Commercial/Indu; shank thread size:5/16-24 in; length to ball center:1.562 in; |
| S LIMITED RMS24 M Bearings | bearing element:Needle Rollers; stud diameter:0.3750 in; stud type:Eccentric; thread size:3/8-24; series:Inch CAMROL (CF; radial dynamic load capacity:1660 lbs; manufacturer catalog number:2060210000; roller material:Chrome Steel; roller shape:Flat; radial static load capacity:1500 lbs; |
| S LIMITED J912 OH/Q Bearings | continuous temperature range:-22 to 400°F; typical application:Exceptional Bearing; misalignment tolerance:0.020 in; pressure tolerance:Ambient; width:0.7000 in; harmonization code:8487900040.US; maximum shaft surface speed:12000 fpm; shaft diameter:1.1818 in; D:1.9690 in; manufacturer catalog number:29602-5599; |
| S LIMITED UCP206-19MM T Bearings | bore type:Round; locking device:Double Set Screw; housing construction:Solid Pillow Block; d:5.9375 in; mounting:Four-Bolt Base; |
| S LIMITED UCF218-90MM Bearings | Sealed Speed Rating n3:23000 rpm; D:22.0000 mm; Basic Dynamic Radial Load Rating C:3250 N; B:11.99 mm; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:43000 rpm; d:8.000 mm; Grease Speed Rating Open/Shielded n1:36000 rpm; Basic Static Radial Load Rating Co:1370 N; Accessories:Synthetic Rubber Sea; |
| S LIMITED NATR17 PPX Bearings | Cage Type:Steel; Seals or Shields:Open Type; d:60mm; B:28mm; Limiting Speed Rating (r/min):4400; Clearance:C2; Weight:1.10 KGS; Dynamic Load Rating (kN):169; Reference Speed Rating (r/min):5500; Static Load Rating (kN):174; |
| S LIMITED UCP214-43MM/Q Bearings | d:20 mm; rod end type:Male Threaded; shank thread size:M20 x 1.5 mm; thread direction:Right Hand; |