| S LIMITED N413M Bearings | Seals or Shields:Two Rubber Seals; Grease Limiting Speed (r/min):1800; d:140mm; Availability:In Stock; Static Load Rating (kN):109; Clearance:Standard; Dynamic Load Rating (kN):110; Weight:3.48 KGS; B:33mm; Cage Type:Steel; |
| S LIMITED SSRI6632 ZZEE Bearings | duty type:Normal Duty; bore type:Round; manufacturer catalog number:049872; d:1.0000 in; expansion type:Non-Expansion Bearin; finish/coating:Uncoated; locking device:Set Screw; lubrication type:Lubrication Fitting; series:P2B; mounting:Two-Bolt Base; |
| S LIMITED UCP202-10 47MM/Q Bearings | number of rows:1; flanges:(2) Outer; B:40 mm; closure type:Open; ring separation:Separable Outer Ring; fillet radius:2.5 mm; cage material:Polyamide; finish/coating:Uncoated; dynamic load capacity:425000 N; series:NJ2; |
| S LIMITED N08 Bearings | Oil Speed Rating n2:3400 rpm; d:80.000 mm; Basic Dynamic Radial Load Rating C:182000 N; D:170.0000 mm; Basic Static Radial Load Rating Co:156000 N; Sealed Speed Rating n3:2400 rpm; Accessories:Shield & Seal & Snap; Grease Speed Rating n1:2400 rpm; Fillet Radius ra:2.00 mm; B:68.30 mm; |
| S LIMITED 45291 Bearings | bushing type:Plain; overall length:4.0000 in; inside diameter:4.2500 in; bushing material:PTFE; bushing outside diameter:4.5000 in; |
| S LIMITED SAPF202-15MM Bearings | Weight:0.02 KGS; B:25mm; Cage Type:Plastic; d:55mm; SKU:2211etn-qbl; D:100mm; Seals or Shields:Open Type; Clearance:Standard; Availability:In Stock; |
| S LIMITED SSRI614/Q Bearings | Availability:In Stock; B:10mm; Seals or Shields:Open Type; Weight:0.15 KGS; Dynamic Load Rating (kN):12.9; Cage Type:Brass; d:75mm; Static Load Rating (kN):13.4; Fatigue Load Rating (kN):0.69; D:95mm; |
| S LIMITED CRL 11 Bearings | ball material:Alloy Steel; overall height:39.5 mm; manufacturer catalog:www.aurorabearing.co; thread direction:Right Hand; ball width:9 mm; rod end type:Female Threaded; length to ball center:30 mm; thread type:-6H; misalignment angle:13 º; shank thread length:14 mm; |
| S LIMITED SBFCT206-17MMG Bearings | overall length:15 in; base to bore centerline:4-9/16 in; standards met:UL, AFBMA, AGMA, ASM; D:11 to 12 in; mounting:Two-Bolt Base; housing material:Cast Iron; expansion type:Expansion Bearing &#; B:11-1/2 in; series:STD; d:2-11/16 in; |
| S LIMITED 87510 Bearings | overall length:2 in; operating temperature range:-35 °F to +; material specification:Oilite®, Synthet; manufacturer catalog:Click here; d:1-5/8 in; maximum v value:1200 (sfm); standards met:SAE 841, CT-1000-K26; sleeve bearing type:Plain Sleeve; D:2 in; bearing material:Oil-Impregnated Bron; |
| S LIMITED UCFX15-48MM Bearings | harmonization code:3926904590.US; manufacturer catalog number:29502-4408; construction description:ISO-GARD® Flange; continuous temperature range:-22 to 400°F; width:0.7500 in; shaft diameter:2.2500 in; Weight:0.199 lb; D:2.9970 in; misalignment tolerance:0.020 in; typical application:Exceptional Bearing; |
| S LIMITED UCFB207-23MM A Bearings | length through bore:1.689 in; radial static load capacity:3460 lbf; bolt size:1/2; bracket width:3-1/2 in; lubrication type:Lubrication Fitting; unit standoff:2-33/64 in; hub diameter:3-3/4 in; radial dynamic load capacity:5820 lbf; d:1.4375 in; horizontal bolt spacing:2 in; |